Disclaimer: This is an example of a student written essay.
Click here for sample essays written by our professional writers.

Any scientific information contained within this essay should not be treated as fact, this content is to be used for educational purposes only and may contain factual inaccuracies or be out of date.

The Absorption Of The Oxyhaemoglobin Biology Essay

Paper Type: Free Essay Subject: Biology
Wordcount: 3065 words Published: 1st Jan 2015

Reference this


A method and apparatus for non invasively measurement of haemoglobin concentration, where we have to select two wavelengths whose haemoglobin extinction coefficient is higher than that of water. The wavelengths which we using here will be an isobestic wavelengths where the absorption of the oxyhaemoglobin and the deoxyhaemoglobin will be the same .Then the incident light beams are made to fall over the predetermined site of the body and received at the other end using a photo detector. The received signal is converted to electric signals. By calculating the attenuation variation caused between the selected wavelengths we will be able to find the haemoglobin concentration in the blood. The isobestic wavelengths which we selected here is 590nm and 800nm.

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Essay Writing Service



Haemoglobin, the main component of the red blood cells for transporting oxygen from the lungs to the capillaries which is involved in the respiratory process. Haemoglobin ,active carrier of oxygen is a compound of iron and four polypeptide chains.Each chain linked to one atom of iron,which carries four molecules of oxygen. By detecting the levels of haemoglobin in the blood is important in the medical field in order to diagnose and treat the patient.

Several methods and devices had been developed to measure the haemoglobin concentration in the blood and all methods have some disadvantages.The present invention will solves some of the problems of the haemoglobin concentration measuring equipments.This technique uses the isobestic wavelengths .The wavelengths which we selected is used in the earlier days in order to make correctness in the haemoglobin concentration. This isobestic wavelengths are radiated to the predetermined site and received at the other end ,where the radiated lights are converted to the electric signals .By taking the attenuation variation caused by the two light sources we can find the haemoglobin concentration.Oxygen saturation can also be calculated using this isobestic wavelength.


The aim of the project is to develop a non invasive measurement technique (PULSE OXIMETER) which gives the haemoglobin concentration in the blood with reduced errors and to implement a faster and time saving technique which will help the practicians for better identification of blood related diseased conditions .


Haemoglobin,the oxygen carrying protein was first discovered by Hunefeld in 1840.In 1851,Otto funke described the growth of haemoglobin crystals by diluting the red blood cells with the pure water,alcohol or ether. Electrophoresis method had been developed for measuring the short time haemoglobin measurement,which is used as a diagnostic indicator of diabetes mellitus .This invention which provides the haemoglobin measurement using a migration path which have inner surface coated with a cationic substance is to be immobilized in the inner surface and using a buffer solution which contains a polymer having an ionic group (water soluble) as an electrophoresis buffer solution.The main disadvantage of this techniques is that the blood sample is needed and time required to obtain the result is higher.

Then later there was a development in the haemoglobin measurement by the Total Internal Reflection (TIR),which will help to determine the haemoglobin concentration in the whole blood.But the disadvantage of this method is that the light transmitted will affect the other colored particles in the blood .

In the blood stream,the glucose is attached to the haemoglobin which is called as glycosylated haemoglobin (HbA1c).There are also other forms of haemoglobin in the blood.The first person who separated the glycosylated haemoglobin from the other forms of haemoglobin is Huisman and Meyering in 1958.By this separated glycosylated haemoglobin ,Anthony Cerami,Ronald Koenig and co worker(in 1976) proposed that this HbA1c is helpful in monitoring the degree of control of glucose metabolism in diabetic patients .


In 1935 by Matthes .who developed the first pulse oximeter which uses two wavelengths of light for optical path length,but the device was said to be cumbersome.In 1942 Millikan developed ear oximeter for some military purposes and in 1949 Wood,added inflatable bladder inorder to find the bloodless zero measurement.

In 1962 ,Shaw developed a eight wavelength ear oximeter for the identification of multiple species of dyshaemoglobin,but discarded due to low commercial success.

In 1974 Aoyagi developed first pulse oximeter byy isolating the pulsating component of ear oximeter,but some other companies had been introduced a device with fibre optic sensor which have a great value in the market.

From 1981 there was an major development in the field of pulse oximeter by Nellcor in which he designed two competing design with the help of Biox.They made some modifications from the earlier design of Aoyagi .In 1987, Nellcor introduced a pulse oximeter which enhances the signal quality under certain conditions of patient motion and a low amplitude peripheral pulse .In this he deisgned a N-200 pulse oximeter with C lock.

In 1996 ,Masimo made the recent changes in the pulse oximeter by introducing Signal Extraction technologies .And it is expected that there will be further development in the signal proceesing power conservation and optical sensor technologies will push the pulse oximeter to the new applications.



In the normal pulse oximeter we are taking two wavelengths ;one at 660nm(Red light) and 940nm (Infrared light).From this figure we can know that at this point there will be more absorption and we are able to get the better result.The absorption of oxyheamoglobin and deoxyheamoglobin at the two different wavelengths will be different and by taking the ratio in the difference of the absorbtion of oxyhaemoglobin and deoxyhaemoglobin we wil be able to find out the haemoglobin concentration.The oxyhaemoglobin(Oxygen carrying haemoglobin) absorbs more infrared light than the red light,where as the deoxyhaemoglobin(Non oxygen carrying haemoglobin) blood absorbs more red light .

But there will be certain factors which are affecting the readings in the pulse oximeter like motion artifacts,Venous pulsations,poor perfusion ..etc.In this venous pulsation is occurred during tricuspid valve failure which results in low saturation readings.Low perfusion is also a major problem in the normal pulse oximeters. In this case there will be not sufficient signal at the detector .This results in insufficient signal at the instrument to make a measurement,which will make the instrument to search for the pulse again.

So inorder to eliminate these errors to an extent we have to look at certain wavelengths which will gives the reading regardless of saturation and to produce sufficient signal at the detector inorder to make the sufficient signal to reach the instrument to make a measurement


The principle of operation for calculating the procedure for measuring the haemoglobin concentration in pulse oximeter is mainly based on the Beer’s-Lambert’s law

The Beer-Lambert’s law is defined as the ratio of oxyhaemoglobin(HbO2) to the total concentration in the blood(HbO2 + deoxyheamoglobin).The measuring of the absorbtion spectra of HbO2 and Hb is given by the difference in the wavelength of the light.

The equation which calculates the ratio of the light intensity is defined as

adapted from:Pulse oximetry

Yun-Thai li

Here the DC and AC are the pulsatile signals,where the DC component will be a constant value and the AC Component will be the fluctuating value which represents the pumping of blood in the arteries.

R= Ratio of light intensity


and =wavelength of the two light sources.


In ths project,the light radiation unit that we are using is to transmit the light radiation through the body parts that includes the blood vessels ,where we are able to find out the haemoglobin concentration .The wavelength which we are going to use is the isobestic wavelength.

According to the chemical kinetics,the isobestic points which is used as a reference points to study the reaction rates .In the pulse oximeter,the isobestic wavelength is used to determine the haemoglobin concentration .This isobestic points have a great value in medicine as a laboratory technique.Because it helps to give a clear picture to determine the oxygen saturation and haemoglobin saturation regardless of its saturation rate.Isobestic points in the pulse oximetry is defined as the point at which the oxyheamoglobin and deoxyheamoglobin have the same absorbtion value at a particular point.The isobestic points is used earlier inorder to make haemoglobin correction in the pulse oximeters.The isobestic points is used as a quality assurance method in spectrophotometer.There are certain standards used in spectrophotometer includes potassium dichromate,bromothymol blue. . .etc

C:Documents and SettingsskunduparambilpaulDesktopuntitled1.bmp

From the above figure we can know that there are certain points which can be referred as the isobestic point.Here we are using isobestic wavelength of 590nm and 800nm.Because at this point the oxyhaemoglobin and deoxyhaemoglobin absorption will be the same.The wavelengths of the isobestic points does not depend on the concentration and the saturation.so that we can use this isobestic wavelengths as a very reliable reference.

This wavelengths used in the pulse oximeter is totally different from the isobestic wavelength,because the wavelengths used in the normal pulse oximeter is at 660 nm( red light ) and the 940 nm ( Infrared light) ,which will give the best results .The evidence for that is the difference between the oxyhaemoglobin and deoxyhaemoglobin wave is at a proper place where we will get the difference between the two waves at the repective wavelength.

But when we using the isobestic wavelength we will not get the difference from the oxyhaemoglobin and deoxyhaemoglobin wave in the above figure. So we are using a different technique that measures the haemoglobin concentration by passing the light through the predetermined site of the body and receives at the other end by the receiver .Then we will calculate how much light intensity we had received at the other receiver side and calculate the amount of substance absorbed at the particular point by looking at the light intensity received at the other end.This technique we will use at the two isobestic points and get the difference for the oxyhaemoglobin and deoxyhaemoglobin.

For example, red light absorbs more deoxygenated blood, if we are radiating a light of wavelength about 590 nm through the predetermined site of the body. Some substances will absorb the light and there will be a change in the intensity of the light received at the other end. By measuring the difference in the light intensity we can calculate absorbance of the deoxygenated cells in that area and similarly in the infrared region. Thus we can get the haemoglobin concentration even regardless of the saturation rate. Here we can use a light which comes under the wavelength of 590 nm, which we will prefer as yellow light and at the range of 800 nm, which is given in the infrared region, so infrared light had been used.



Wavelength -590nm

The light which we use in this project is yellow light because we are using the wavelength of 590 nm.The yellow light we use here is instead of the red light in order to measure the amount of deoxygenated blood at the isobestic point.The deoxyhaemoglobin is referred as the non oxygen carrying haemoglobin.

If we assume that the all haemoglobin molecules are bonded with O2,then we can say that the haemoglobin is said to be fully saturated .While circulating the blood in the capillaries and to veins the haemoglobin release the oxygen molecules and as a result the saturation level decreases.The normal saturation rate level is said to be between 85% and 97%.

Hence by using the wavelength of 590nm we can calculate the amount of deoxygenated blood from the haemoglobin by measuring the intensity of light at the other end.


The isobestic wavelength which we selected at the infrared region is at 800 nm. The oxygenated haemoglobin will allows the yellow light to pass through it and absorbs more infrared light, where as the deoxygenated blood allows more infrared light to pass through it and absorbs more yellow light .

Usually the predetermined site of the body which we select is the finger or toe, which is placed between the source ( LED ) and the receiver ( Photodiode).Once the absorption levels is detected then the ratio of absorption for each wavelength can be obtained.

Thus the Infrared light is used to measure the amount of oxygenated haemoglobin present in the blood.


This project consists of three sections. One the detection unit, processing unit and the display unit. The detection unit consist of Photo diode, amplifier, filters and ADC, where as in the Processing unit we have a ratio calculation unit in order to achieve haemoglobin concentration. Some Microcontrollers have inbuilt ADC. This processing unit is software part using micro controller .The third one display unit is used to display the output result. The display unit can be a computer, TV or an audible device.












The light radiation unit which is used to radiate the wavelengths to a predetermined site of the body .Here we are using yellow and infrared light sources as the light radiation units.


The photodiode is used to detect the light emitted from the predetermined site of the body (Finger or toe)


The amplifier, Filter circuit consist of the signal conditioning circuit.


Here we use operational amplifier (741) which is used to amplify the electric signal from the detector unit.


Here we are using a Low Pass Filter in order to avoid the high frequency noise signals.


The micro controller is used as the processing unit .In some of the microcontrollers there will be inbuilt ADC .Analogue to Digital converter is required because to convert the analogue signals from the filter into the digital form and fed it into the micro controller.


Display unit is used to display the measured values of haemoglobin concentration which can be TV, Computer, 7 segment display or an audible device to hear the reading.



In this we are selecting two isobestic wavelength, where the absorption of the oxyhaemoglobin and the deoxyheamoglobin has the same absorption rate .After selecting the isobestic wavelengths we are transmitting the selected wavelength into the predetermined site of the body .i.e., finger or toe. The light which we transmitting is from the light radiation unit. The light radiation unit can be implemented by LED. The photo detector unit receives the light which is transmitted through the finger, then the received signals are then converted into the electrical signals with the help of photo diode, which can be either Silicon or germanium.

Find Out How UKEssays.com Can Help You!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our services

Then the output from this photodiode is given to the variable calculation unit for calculating the light attenuation variation for each wavelength. The main function of the variation calculation unit is to calculate the light attenuation variation for each wavelength using the electrical which we received at the photo detector unit. From this variation calculation unit it is fed to the ratio calculation unit.The variation calculation unit calculated the light attenuation variation for each wavelength as the ratio of the time variant component ( AC ) to the time invariant component ( DC ).

The instrument further requires the hardware section as amplifier, LPF and an ADC between the photo detection unit and the variation calculation unit. The function of the amplifier is to amplify the electrical signals from the photo diode. Then the Low Pass Filter is used to pass the low frequency signals and to block the high frequency signals and noise. We had selected the Low Pass Filter because of the signals from the body will be of low frequency.The low frequency component of the particular electrical signal is amplified by the amplifier and fed to the ADC.The function of the ADC is to convert the analogue signal to the digital signal.

The Digital signal after being converted by the ADC is then fed up to the variation calculation unit which in practice can be performed by the micrcocontroller.The ratio calculation unit calculates the ratio between the light attenuation variation for the wavelengths which we had given to the ratio calculation unit and then feds to the concentration calculation unit .The concentration calculation unit calculates the haemoglobin concentration and gives the output to the display unit ,where we can see the ouput result.

Radiate light beams through the predetermined site of the body

Select two isobestic wavelength



Calculate the haemoglobin concentration

Calculate the ratio of the light attenuation variation between the wavelengths

Obtain light attenuation variation for each wavelengths

Convert light beams into electrical signal

Receive the transmitted light


Cite This Work

To export a reference to this article please select a referencing stye below:

Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.

Related Services

View all

DMCA / Removal Request

If you are the original writer of this essay and no longer wish to have your work published on UKEssays.com then please: